- Continuous Current: 45A (per motor)
- Burst Current: 60A (per motor)
- Input Voltage: 3 – 6S Lipo
- BEC output: 5V / 1.5A, 10V / 1.5A
- Firmware: BLHeli_32
- Modes: OneShot (42/125) DShot (150/300/600/1200) Supported
- Size: 40 x 64 x 6.5 mm
- Weight: 11.5g
- 4-in-1 ESC
- XT60 connector with 14AWG wires (130mm long) for battery connection
- 560uF/35V and 1000uF / 35V capacitors
- Pigtail wires.
Use the long wire included with the 4-in-1 ESC to connect it to the RADIX FC with red 10V and black GND wires removed on the RADIX FC side. Leaving the wires connected will damage the RADIX FC!
Make sure to check out our awesome manual for more information on how to build your quad with this ESC and the RADIX FC!