RADIX 2 Power Board


For full specs, see HERE


In stock

RADIX 2 Flight Controller

H7 based 30 x 30 flight controller with full graphic OSD


  • RADIX 2 flight controller
  • Sweet stickers
  • Silicone anti-vibration grommets 4x
  • 5-pin cable for motor outputs 5 to 8
  • BrainFPV 4-in-1 ESC cable kit (cables and connectors to make a cable that works with any 4-in-1 ESC with a JST-SH 7 pin, 8 pin, or 10 pin connector)


Out of stock

SKU: 641606519901 Category:


BrainFPV RADIX 2 30 x 30 Power Board (PB)

Designed for serious power, the RADIX 2 PB can handle up to 8S (35 V) input voltage and up to 160 A constant current / 220 A burst current. The RADIX 2 flight controller stacks directly onto it and is plug-and-play using the included cable. The PB has a LC filter to provide clean, filtered battery voltage to the flight controller to power it. In addition, it has a 5 V / 2 A voltage regulator to power accessories like LED’s. The 5 V regulator can optionally be switched to 10 V and can e.g. be used to power a digital FPV system.

Note: The RADIX 2 PB is NOT plug-and-play with the original RADIX (F4 based) flight controller. It can be used with the RADIX, but it requires removing the “PWR wire” from the connector. Please refer to the manual for how to do so.

For full specs, see HERE


  • RADIX 2 Power Board
  • 10-pin cable for connecting RADIX 2 flight controller
  • Capacitor (330 uF, 50 V)
Print Friendly, PDF & Email